A: Haɗin roba shine “tushe” na ingancin samfuran roba, kuma daidaiton rabo na kayan raw yana bayyana kai tsaye aikin ƙarshe na zaren roba/matattarar. Aiki na atomatik na nauyi da rarrabawa yana dogara akan kulawar hankali na PLC + ƙwayoyin nauyi masu inganci (daidaito ≤±0.1g) don samun ingantaccen rarrabawa na roba mai kauri, ƙarin kaya, da wakilan vulcanization. Idan aka kwatanta da rarrabawa na hannu, yana kawar da kuskuren ɗan adam (bambanci na aikin haɗin roba ≤±3%), yana inganta ingancin rarrabawa ta 3-5 sau, kuma yana rikodin duk bayanai a cikin lokaci don bin diddigi—cikakken cika bukatun gudanar da inganci na IATF 16949/ISO 9001.

A: Don yanayi masu haushi (kettle na hadin kimiyya, tankunan electroplating, bututun acid-base), muhimmin abu shine zaɓar kayan da ke da ƙarfi a cikin kwanciyar hankali na kimiyya:

• Babban karfafa lalacewa (yawancin acid/alkalin): FKM (fluororubber, aikin da aka daidaita da farashi);
• Tsananin lalacewa mai ƙarfi (acid/alkali/masu warwarewa masu yawa): FFKM (perfluoroelastomer, juriya ga lalacewa a kowane fanni);
• Tuntuɓar kai tsaye da kafofin ƙonewa: fata mai haɗin PTFE (rufa PTFE + jigon roba, kariya biyu daga ɓarna).

A cikin tsari, ka guji zanen da ba shi da ciki—ka yi amfani da tushe mai ƙarfi/kundin sel ɗin rufaffen don hana ruwa mai corroding shiga cikin ciki, kuma ana iya shafa fuskarsa da mai kariya daga tsatsa don kariya ta biyu.

A: Bisa ga IATF 16949/ISO 9001, kulawar ingancin dukkan matakai na kayayyakin roba an raba ta zuwa matakai 5 na asali:

1. Duba kayan aikin da ke shigowa: Gwada ƙimar Mooney/tsabtace na roba mai ƙyalli/gwanin, ƙi kayan da ba su dace ba;
2. A cikin samfurin aikin: Samu kaya kowane minti 20 yayin samarwa, gwada ƙarfi/daidaiton girma, daidaita ƙayyadaddun a cikin lokaci na ainihi;
3. 100% binciken samfurin da aka kammala: Duba bayyanar/oga/ingancin sealing na dukkan samfura;
4. Gwajin samfurin batch: Ayi zaɓin bazuwar kowanne batch (5000m/batch) don gwada tsufa/juri na man/kayan aikin jiki, a fitar da rahotannin gwaji;
5. Binciken bayanai: Rubuta dukkan bayanan dubawa/kimanta a cikin lokaci na gaske, adana fiye da shekaru 3, da kuma fahimtar tambayar dukkan hanyar samarwa da danna guda.

A: Ana daidaita ginshiƙan roba na masana'antu ne musamman da bukatun kare kayan aiki + tsarin shigarwa, babban shirin shine:

• Kofar masana'antu/gidan wutar lantarki na al'ada: IP54, EPDM mai jure wuta, slot na katin/gida na bayan lebur (mai saukin maye gurbin);
• Kayan kwandon PLC/inverter/kwandon sadarwa na waje: IP65, EPDM mai jure wuta na inganci, shigar da ramin kati mai jure (matsawa sosai);
• Na'urorin inji/kayan aikin sinadarai: IP67, kayan da suka ƙi gurbatawa/tsarin hana lalacewa (CR/FKM), shigarwa da aka makala da kuɗa (hakan yana hana tsawa/gama).

Mabuɗin shine tabbatar da cewa an matsa strip ɗin roba completely a lokacin girkawa (matsakaicin matsa 20%-30%) don samun aikin IP da aka tsara.

A: Daidaitaccen shigar da zanen roba yana danganta da hanyar shigarwa, tare da mahimman abubuwa 3 don nau'ikan gama gari:

1. Nau'in ramin katin: Wanke ramukan da farko (ba tare da kura/mai ba), sannan danna strip din roba cikin ramin mataki-mataki don tabbatar da babu jujjuyawa/wannan iska, sannan ku yanke kayan da suka wuce a kusurwa (daidaita tare da wannan haɗin jujjuya don haɗin kai mara kyau);
2. Nau'in malaman baya: Yanke fim din kariya ku matsa da karfi (zafin jiki ≥15℃ don samun ingantaccen manne), guji maimaita yankewa/maida (yana lalata bakin man), kuma ka saka tare da takarda mai gefe biyu don taimako a kusurwa;
3. Nau'in guga mai gyara: Aiwatar da ƙarfin gugan daidai, guji yin firgita (yana haifar da canjin fasalin roba/karaya), kuma ƙara wani shimfiɗa tsakanin gugan da strip ɗin roba (hana gurbatawa).

Bayan shigarwa, duba darajar shigarwa—tabbatar da cikakken tuntuɓar da kayan aikin/jiki ba tare da rami ba.