A: Ci gaba da fitar da vulcanization shine babban tsari na samarwa don yanayin roba mai inganci (na mota/ masana'antu). Wannan yana tabbatar da kafa roba a karo guda tare da tsayayyen tsakiya ta hanyar ci gaba da ciyarwa → fitar da siffa → vulcanization a kan layi → gyaran bayanan. Babban fa'idar ita ce yana tabbatar da matakin da ba a taba samu ba na daidaito na roba (kurakuran tsakiya ≤±0.1mm), kayan halaye masu ɗorewa, kuma yana goyan bayan samarwa na masara na awa 24—wannan shine dalilin da ya sa shi ya zama zabi na farko ga OEM don tallafawa bulk na sassan roba na motoci da masana'antu.

A: Don yanayi masu zafi sosai (tanderu na masana'antu, wuraren injini, bututun sinadarai masu zafi), zaɓin kayan yana dogara ne akan ainihin zangon zafin:

• 150-180℃: EPDM mai jure zafin zafi (mayan ciniki mai tsada, asali kare shiga zafi);
• 150-200℃: FVMQ (rubber fluorosilicone, juri nagari ga yanayi + juri ga zafin jiki mai yawa);
• 200-300℃: FFKM (perfluoroelastomer, mafi kyau juriya ga yanayin zafi mai yawa tsakanin kayan roba, don yanayin zafi mai tsanani).

Bugu da ƙari, an ba da shawarar amfani da tsarin gubar roba tare da ƙira mai ƙarancin hanƙaka, tare da ƙara kauri da ya dace da ɗanɗano mai rufi na ciki don ƙarin inganta daidaiton zafi mai ƙarfi.

A: Mahimman alamomin jiki guda hudu da ke tantance tasirin amfani da filayen roba/sigogi suna cikin abubuwa masu mahimmanci, tare da bukatun ma'aunin masana'antu kamar haka:

1. Tushen wuya: 40-70 Shore A (55-65 Shore A don zaren mota, ana iya daidaita bisa ga yanayin aiki don zaren masana'antu);
2. Karfin ja: ≥8MPa (HNBR kayan aiki masu inganci ≥15MPa);
3. Tsawo a lokacin karya: ≥300% (tabbatar da karfinta da kariya daga yanyanke);
4. Tsarin Matsawa: ≤25% (70℃×22h, 150℃×70h don kayan zafi - muhimmin alamar tsawon rayuwar dinke).

Dukkanin alamomin suna gwadawa bisa ga ka'idodin ISO na duniya, tare da kula da kuskure sosai (misali, kuskuren tauri ≤±2 Shore A).

A: Ana daidaita ginshiƙan roba na masana'antu ne musamman da bukatun kare kayan aiki + tsarin shigarwa, babban shirin shine:

• Kofar masana'antu/gidan wutar lantarki na al'ada: IP54, EPDM mai jure wuta, slot na katin/gida na bayan lebur (mai saukin maye gurbin);
• Kayan kwandon PLC/inverter/kwandon sadarwa na waje: IP65, EPDM mai jure wuta na inganci, shigar da ramin kati mai jure (matsawa sosai);
• Na'urorin inji/kayan aikin sinadarai: IP67, kayan da suka ƙi gurbatawa/tsarin hana lalacewa (CR/FKM), shigarwa da aka makala da kuɗa (hakan yana hana tsawa/gama).

Mabuɗin shine tabbatar da cewa an matsa strip ɗin roba completely a lokacin girkawa (matsakaicin matsa 20%-30%) don samun aikin IP da aka tsara.

A: Daidaitaccen shigar da zanen roba yana danganta da hanyar shigarwa, tare da mahimman abubuwa 3 don nau'ikan gama gari:

1. Nau'in ramin katin: Wanke ramukan da farko (ba tare da kura/mai ba), sannan danna strip din roba cikin ramin mataki-mataki don tabbatar da babu jujjuyawa/wannan iska, sannan ku yanke kayan da suka wuce a kusurwa (daidaita tare da wannan haɗin jujjuya don haɗin kai mara kyau);
2. Nau'in malaman baya: Yanke fim din kariya ku matsa da karfi (zafin jiki ≥15℃ don samun ingantaccen manne), guji maimaita yankewa/maida (yana lalata bakin man), kuma ka saka tare da takarda mai gefe biyu don taimako a kusurwa;
3. Nau'in guga mai gyara: Aiwatar da ƙarfin gugan daidai, guji yin firgita (yana haifar da canjin fasalin roba/karaya), kuma ƙara wani shimfiɗa tsakanin gugan da strip ɗin roba (hana gurbatawa).

Bayan shigarwa, duba darajar shigarwa—tabbatar da cikakken tuntuɓar da kayan aikin/jiki ba tare da rami ba.